Comments Locked

16 Comments

Back to Article

  • treadhed - Thursday, September 9, 2004 - link

    This case fukin blows. The option to have fan control, temp readouts, yada yada are not worth the trouble thermaltake makes hooking it all up. It uses power connecters for all of its sensor and control function wires, which can make it VERY confusing when plugging it in. On top of that I think I got a wire crossed and blew my powersupply, because it's not turning on any more. I've built hundreds of systems in many types of cases. That is definatly my worst experiance ever.

    This joker is freaking HEAVY too, I mean heavy to the point of being ridiculus.
  • treadhed - Friday, July 30, 2004 - link

    Mine just came in, and I'll say they could do without the thermaltake logo everywhere. The worst was the thermaltake "coolall your life" logo stamped on the plexi window, which I did not see when I was browsing cases. Out of every case I looed at when I was shopping around this one looked the most cooling efficient "out of the box", which is important when you really don't have time to spend monkeying around with modding a case plus making it heat efficient.

    This has it all it one package, the extra well placed fans plus the front temp readout and fan control. The front temp readout is what contributes to all of the wiring, but then again, any front temp and fan control readout you add to your case is going to contribute to alot of wiring, so that's really not a minus for this case.

    I'll post again after I've put my parts in.
  • sandorski - Monday, July 26, 2004 - link

    4 months ago I got a VM3000(skull) and am very pleased with it. I could live without the Light inset on the front(skulls on each end of the Thermtake name), which is quite gaudy when on, but overall it's a nice looking case IMO. However, despite that light, the front door on the Skull is relatively conservative, unlike what the front of this reviewed case looks like.

    The Toolless design is real nice as are the drive rails.

  • shuttleboi - Sunday, July 25, 2004 - link

    This is the most grotesque case I have ever seen in my life. Why can't PC makers take a cue from Apple's engineering team and produce aesthetically pleasing cases?

    To posters #4, 7, and 8 (and anyone else who bought this fugly case): get your eyes checked.
  • darklight0tr - Saturday, July 24, 2004 - link

    I actually like many of the Thermaltake designs. Sure, they are a bit outlandish, but I have found many of the current cases designs offered by manufacturers to be a bit boring. At least Thermaltake is attempting to add a bit of flare to their cases. I guess it just doesn't work for some.

    I plan on buying a WinGo V7000D for my next computer.
  • Dantzig - Saturday, July 24, 2004 - link

    Please review some classier looking cases. I didn't know cases this ugly existed until Anandtech started reviewing them! This one is almost as bad as the spiderman case.

    The cases don't have to be boring, but ones that don't look like a joke would be nice.
  • PuravSanghani - Friday, July 23, 2004 - link

    #5: That number in the summary was a typo and has been fixed. The actual temperature of the CPU after 30 minutes of system on time was 43.6 Degrees Celsius which is a safe 54 Degrees under the Athlon64 3200's 97 Degree maximum stated operating temperature.
  • skunkbuster - Friday, July 23, 2004 - link

    the word 'gaudy' comes to mind when i look at this thing.
  • skiboysteve - Friday, July 23, 2004 - link

    eyah i had to work out one of the plastic things to get my radeon in as well, very annoying to put your screw driver through the tiny opening after you take off the plastic thing.
  • dachkine - Friday, July 23, 2004 - link

    I've spent some long hours assembling my new computer using this case and even though the cables were a mess, I believe the worse thing is the PCI screwless mechanism.
    I have a Radeon 9800 and it was not possible to hold it it the plastic fixing thing.

  • Operandi - Thursday, July 22, 2004 - link

    I agree with the above comments, it's becoming pretty clear that this isn't the type of case your target audience is looking for.
  • skiboysteve - Thursday, July 22, 2004 - link

    "Our results show that the CPU was kept at a stable operating temperature, at 56.2 degrees, which is about 40 degrees Celsius below the Athlon 64 3200's maximum recommended operating temperature."

    "System On-Time CPU
    30 43.6"

    What??
  • skiboysteve - Thursday, July 22, 2004 - link

    i have the 3000a and I love it to death, although i have to agree, there are way too many wires. I did a great job hiding them though so the window looks good.
  • Pollock - Thursday, July 22, 2004 - link

    No, #1, check some of the previous case reviews here; there ARE uglier things. Several of them.
  • TrogdorJW - Thursday, July 22, 2004 - link

    I have to agree. Sure, it's big and roomy. It also scream, "I LOVE THERMALTAKE!" Personally, I would rather make a different kind of statement with my case.

    You know what someone needs to do? Create a case with pre-installed fans and wires, with a separate power unit (a very small one should suffice) to provide all of the fans and other devices with power. They could build the system with all the fans installed and still keep the majority of wires hidden away. And they should use 120mm fans spinning at lower RPMs. *That* would be something to spend $160 on!

    Spend $160 on this monstrosity? Ugh. If you need big, there are better options. If you want silent, there are MUCH better options. If you want bright lights and gawdy flash, however, this case fits the bill. I'm sure there are a bunch of teenagers out there that think this case looks totally l33t. They're welcome to it, I suppose.
  • JKing76 - Thursday, July 22, 2004 - link

    That is truely the ugliest thing I have ever seen.

Log in

Don't have an account? Sign up now