Seagate Enterprise NAS HDD 6 TB Review
by Ganesh T S on December 10, 2014 8:00 AM EST- Posted in
- NAS
- Storage
- Seagate
- HDDs
- Enterprise
Specifications and Feature Set Comparison
Prior to getting into the performance evaluation, we will take a look at the specifications of the 6 TB Seagate Enterprise NAS HDD and see how it compares against the other NAS-specific hard drives that we have looked at before. As mentioned in our launch coverage, the Enterprise NAS HDD takes the hardware guts from the Enterprise Capacity v4 drives and firmware features from the NAS HDD line. The hardware aspects (such as the rotational speed, cache size, URE ratings etc.) come from the Enterprise Capacity v4. The table below presents the data for the drive against the others in our evaluation database.
Comparative HDD Specifications | ||
Aspect | ||
Model Number | ST6000VN001 | ST6000VN001 |
Interface | SATA 6 Gbps | SATA 6 Gbps |
Sector Size / AF | 512E | 512E |
Rotational Speed | 7200 RPM | 7200 RPM |
Cache | 128 MB | 128 MB |
Rated Load / Unload Cycles | 600 K | 600 K |
Non-Recoverable Read Errors / Bits Read | < 1 in 1015 | < 1 in 1015 |
MTBF | 1.2 M | 1.2 M |
Rated Workload | 180 TB/yr | 180 TB/yr |
Operating Temperature Range | 5 to 60 C | 5 to 60 C |
Acoustics (Seek Average - dBA) | 27 dBA | 27 dBA |
Physical Parameters | 14.7 x 10.19 x 2.61 cm; 780 g | 14.7 x 10.19 x 2.61 cm; 780 g |
Warranty | 5 years | 5 years |
Price (in USD, as-on-date) | $TBD | $TBD |
A high level overview of the various supported SATA features is provided by HD Tune Pro.
We get a better idea of the supported features using FinalWire's AIDA64 system report. The table below summarizes the extra information generated by AIDA64 (that is not already provided by HD Tune Pro).
Comparative HDD Features | ||
Aspect | ||
DMA Setup Auto-Activate | Supported; Disabled | Supported; Disabled |
Extended Power Conditions | Supported, Enabled | Supported, Enabled |
Free-Fall Control | Not Supported | Not Supported |
General Purpose Logging | Supported; Enabled | Supported; Enabled |
In-Order Data Delivery | Not Supported | Not Supported |
NCQ Priority Information | Not Supported | Not Supported |
Phy Event Counters | Supported | Supported |
Release Interrupt | Not Supported | Not Supported |
Sense Data Reporting | Supported, Disabled | Supported, Disabled |
Software Settings Preservation | Supported; Enabled | Supported; Enabled |
Streaming | Not Supported | Not Supported |
Tagged Command Queuing | Not Supported | Not Supported |
51 Comments
View All Comments
hlmcompany - Wednesday, December 10, 2014 - link
I can see that happening. I just never thought of IntelliPower as being such a thing. HDD's cannot vary their spindle speed during data access. A fixed spindle speed during operation is monitored by the drive, and if it changes, it is considered a major error. You'd actually hear the WD drive Click twice, and then read Track 0 in an attempt to re-calibrate it's position.extide - Wednesday, December 10, 2014 - link
This would be really easy to verify with a oscilloscope, just watch the waveforms going into the stepper motor... (But yeah, intellipower drives run at fixed speeds, although different models can run at different speeds than other models)MrSpadge - Wednesday, December 10, 2014 - link
Thanks.. that sounds better than their 1st explanations. Although I'd still prefer if they said straight "it's 5.4k rpm, give or take a few".hlmcompany - Wednesday, December 10, 2014 - link
Marketing.... *sigh*hlmcompany - Wednesday, December 10, 2014 - link
Seagate lists this drive as 7200 rpm, which matches its direct competitor, the WD Red Pro.Oyster - Wednesday, December 10, 2014 - link
Ganesh, I'll admit I didn't read between the lines, but why exclude the WD Red Pros from the analysis? Seems a bit out of place to compare an enterprise class HD to a non-enterprise class HD (WD Reds @ 5400 RPM, with 3 year warranty, lower MTBF)?MrSpadge - Wednesday, December 10, 2014 - link
Because there is no 6 TB Red Pro. Using 800 GB platters it already needs 5 of them to reach 4 TB and can not even reach 5 TB yet.MrSpadge - Wednesday, December 10, 2014 - link
Ganesh, in your conclusion you simply attribute the performance advantage of the Seagates to their larger cache. While the cache does help, it normally doesn't help a lot once you have enough of it. Otherwise we would see much larger caches already, as DRAM in the sub-GB range is really cheap, whereas we're talking about 500$ enterprise HDDs here.I suspect the larger platter density of the Seagates has more to do with their performance than the cache. Firmware also plays a major in real world HDD peformance.
ganeshts - Wednesday, December 10, 2014 - link
We observed similar performance advantages for the Seagate Enterprise Capacity v4 vs. the WD Red Pro at the 4 TB capacity point.Both of them use the same number of platters, have the same rotational speed. The only difference was the cache size.
That said, things are indeed different in this case - the WD Red has lower rotational speed, but does have higher platter density (1.2TB/platter) at the 6TB point. So, I should probably have not stressed the cache size differences too much (just had a hangover from the 4TB review)
MrSpadge - Wednesday, December 10, 2014 - link
The 4 TB Seagate Enterprise Capacity v4 also uses 1 TB platters, whereas the Red Pro uses 800 GB platters. Compare the sequential write speeds in MB/s (max - average - min):Red Pro 4 TB: 179 - 142 - 86
Ent. Cap. v4 4 TB: 210 - 166 - 97
Ent. Cap. v4 6 TB: 224 - 171 - 104
The Seagates perform almost identical, with a minor advantage for the 6 TB model. However, the Red Pro is significantly slower.